Spa filter

A new spa filter will save your pump

With no moving parts or electrical switches to fail, spa filters do not have a defined termination point. Instead the fine interstices of the media matrix gradually plug up over time. In a typical spa, the culprit that plugs the filter cartridge is perspiration and body oils combined with soaps, chemicals and very fine particulate. In a swimming pool, the loading is primarily debris along with sun tan lotions and organic matter such as algae. Assuming the spa filter is properly maintained and correctly sized to the pump, determining when the cartridge is exhausted depends primarily on three factors:

1. Shorter cycle time between cleanings
2. Low water flow rate and high differential pressure
3. Catastrophic failure such as a tear in the media or center core collapse

All three are dependent upon proper pool or spa water chemistry and following a routine maintenance schedule. Homeowners should be reminded that spa filter elements are plastic and should be handled and maintained accordingly. To maximize the life of a spa filter cartridge I suggest:

• Clean the elements per cleaning instructions.
• Never us a stiff brush to scrub the media.
• Maintain pool or spa water chemistry in proper balance.
• Do not allow the differential pressure to go over 8 psi between cleanings.
• Alternate 2 sets of filter cartridges when cleaning.